ViewSonic PJD5351 - DLP Projector User's Guide download pdf (Page 25)

Operation 21

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option

for setting up password security. The password can be set through the On-Screen Display

(OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on

page 20.

You will be inconvenienced if you activate the password functionality and subsequently forget

the password. Print this user manual (if necessary) and write the password you used in this

manual, and keep it in a safe place for later use.

Setting a password

Once a password has been set, the projector cannot be used unless the correct password is

entered every time the projector is started.

1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security

Settings menu. Press MODE/ENTER. The Security Settings page displays.

2. Highlight Power On Lock and select On by pressing / .

3. As pictured to the right, the four arrow keys ( ,

, , ) respectively represent 4 digits (1, 2,

3, 4). According to the password you desire to

set, press the arrow keys to enter six digits for the

password.

4. Confirm the new password by re-entering the

new password.

Once the password is set, the OSD menu returns to the Security Settings page.

The digits being input will display as asterisks on-screen. Write your selected password down

here in this user manual in advance or right after the password is entered so that it is available

to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this user manual in a safe place.

5. To leave the OSD menu, press MENU/EXIT.

If you forget the password

If the password function is activated, you will be asked

to enter the six-digit password every time you turn on

the projector. If you enter the wrong password, the

password error message as pictured to the right

displays lasting for three seconds, and the message

'INPUT PASSWORD' follows. You can retry by

entering another six-digit password, or if you did not

record the password in this user manual, and you absolutely do not remember it, you can use

the password recall procedure. See "Entering the password recall procedure" on page 22 for

details.

If you enter an incorrect password 5 times in succession, the projector will automatically

shut down in a short time.

INPUT NEW PASSWORD

BackMENU

Password Error

Please try again.

http://www.pureglare.com.au

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 64 65

Comments to this Manuals

No comments

ViewSonic PJD5351 - DLP Projector User's Guide Page 25

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJD5351 - DLP Projector