ViewSonic PJD5351 - DLP Projector User's Guide download pdf (Page 36)

Operation32

Freezing the image

Press FREEZE on the remote control to freeze the

image. The word 'FREEZE' will display in the upper

left corner of the screen. To release the function, press

any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures

are running on the video or other device. If the

connected devices have active audio output, you will

still hear the audio even though the image is frozen on

screen.

Operating in a high altitude environment

We recommend you use the High Altitude Mode when your environment is between 1500

m–3000 m above sea level, and temperature is between 0°C–35°C.

CAUTION

Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature

is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under

such a condition.

To activate the High Altitude Mode:

1. Press MENU/EXIT and then press / until

the SYSTEM SETUP: Advanced menu is

highlighted.

2. Press to highlight High Altitude Mode and

press / to select On. A confirmation

message displays.

3. Highlight Yes and press MODE/ENTER.

Operation under "High Altitude Mode" may cause a higher decibel operating noise level

because of increased fan speed necessary to improve overall system cooling and

performance.

If you use this projector under other extreme conditions excluding the above, it may display

auto shut-down symptoms, which is designed to protect your projector from over-heating.

In cases like this, you should switch to High Altitude Mode to solve these symptoms.

However, this is not to state that this projector can operate under any and all harsh or

extreme conditions.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker. Be sure

you have made a correct connection to the projector audio input. See "Connection" on page

13 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:

1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced

menu is highlighted.

2. Press to highlight Audio Settings and press MODE/ENTER. The Audio Settings

page displays.

3. Highlight Mute and press / to select On.

We recommend you use the High Altitude

mode by selecting it whenever your

environment is higher than 1500 m.

Do you want to turn High Altitude Mode

ON?

Yes

Notice

http://www.pureglare.com.au

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 64 65

Comments to this Manuals

No comments

ViewSonic PJD5351 - DLP Projector User's Guide Page 36

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJD5351 - DLP Projector