ViewSonic PJD5351 - DLP Projector User's Guide download pdf (Page 33)

Operation 29

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable

for your need. You can use one of the picture modes (except the User 1/User 2) as a starting

point and customize the settings.

1. Press MENU/EXIT to open the On-Screen Display (OSD) menu.

2. Go to the PICTURE > Preset Mode menu.

3. Press / to select User 1 or User 2.

4. Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Preset Mode

sub-menu item.

5. Press / to select a picture mode that is closest to your need.

6. Press to select a sub-menu item to be changed and adjust the value with / .

See "Fine-tuning the image quality in user modes" below for details.

7. When all settings have been done, highlight Save Settings and press MODE/ENTER

to store the settings.

8. The confirmation message 'Setting Saved' displays.

Using Screen Color

In the situation where you are projecting onto a colored surface such as a painted wall which

may not be white, the Screen Color feature can help correct the projected picture’s colors to

prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Screen Color menu and press / to select a

color which is closest to the color of the projection surface. There are several precalibrated

colors to choose from: Whiteboard, Greenboard, and Blackboard.

This function is only available when a PC type input signal is selected.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available

when User 1 or User 2 mode is selected. You can make adjustments to these functions

based on your needs.

Adjusting Brightness

Highlight the PICTURE > Brightness menu and press / .

The higher the value, the brighter the image. And the

lower the setting, the darker the image. Adjust this

control so the black areas of the image appear just as

black and that detail in the dark areas is visible.

Adjusting Contrast

Highlight the PICTURE > Contrast menu and press / .

The higher the value, the greater the contrast. Use this

to set the peak white level after you have previously

adjusted the Brightness setting to suit your selected

input and viewing environment.

+50

+30

+70

+30

-30

http://www.pureglare.com.au

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 64 65

Comments to this Manuals

No comments

ViewSonic PJD5351 - DLP Projector User's Guide Page 33

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJD5351 - DLP Projector