ViewSonic PJD5351 - DLP Projector User's Guide download pdf (Page 27)

Operation 23

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only

display one full screen at a time.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default

of this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available

input signals.

1. Press SOURCE on the projector or remote

control. A source selection bar displays.

2. Press / until your desired signal is

selected and press MODE/ENTER.

Once detected, the selected source information

will display on the screen for seconds. If there

are multiple devices connected to the

projector, repeat steps 1-2 to search for another

signal.

• The brightness level of the projected image will

change accordingly when you switch between

different input signals. Data (graphic) "PC"

presentations using mostly static images are

generally brighter than "Video" using mostly

moving images (movies).

• The input signal type effects the options available

for the Preset Mode. See "Selecting a picture

mode" on page 28 for details.

• The native display resolution of this projector is in

a 4:3 aspect ratio. For best display picture results,

you should select and use an input signal which

outputs at this resolution. Any other resolutions

will be scaled by the projector depending upon

the 'aspect ratio' setting, which may cause some

image distortion or loss of picture clarity. See

"Selecting the aspect ratio" on page 26 for details.

D-Sub / Comp. 1

Video

S-Video

D-Sub / Comp. 2

http://www.pureglare.com.au

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 64 65

No comments

ViewSonic PJD5351 - DLP Projector User's Guide Page 27