ViewSonic PJ551D - XGA DLP Projector User's Guide download pdf (Page 9)

ViewSonic PJ500/PJ550/PJ501/PJ551 6

Installation

Refer to the graphics and table on this page to determine the screen size and projection distance.

The projection distances shown in the table below are for full size (PJ500/PJ501:800x600pixels,

PJ501/PJ550:1024 x 768 pixels).

Distance from the projector to the screen (+10%).

Distance from the lens center to the bottom of the screen (+10%).

Figure 5: Screen Views

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. The angle is

variable within approximately 0° to 9°.

Lift up the front side of the projector, press the foot adjuster button, and adjust the projection

angle.

Release the adjuster button to lock at the desired angle.

Rotate the foot pad to adjust the left/right tilt of the displayed image.

Table 1: Projection Distance

Screen Size

Inches (m)

Minimum and Maximum

Inches

(cm)

40 (1.0) 37 (0.9) 46 (1.2) 3 (8.7)

60 (1.5) 57 (1.5) 69 (1.8) 5 (13.1)

80 (2.0) 77 (1.9) 93 (2.4) 7 (17.4)

100 (2.5) 96 (2.4) 116 (2.9) 9 (21.8)

120 (3.0) 116 (2.9) 139 (3.5) 10 (26.1)

150 (3.8) 145 (3.7) 174 (4.4) 13 (32.7)

200 (5.0) 194 (4.9) 233 (5.9) 17 (43.5)

Warnings

• Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector.

• Make sure the heat ventilation holes are not blocked.

• Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts (i.e. LCD panel,

lens assembly, etc.)

Figure 6: Angle Adjustment

Top View

Screen

Side View

Lens

center

Foot Adjuster

Press the foot adjuster button

Rear Foot Adjuster

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

ViewSonic PJ551D - XGA DLP Projector User's Guide Page 9