ViewSonic PJ551D - XGA DLP Projector User's Guide download pdf (Page 20)

17 ViewSonic PJ500/PJ550/PJ501/PJ551

OPTION Menu

The OPTION menu has 5 items as shown in the Table 9.

Please select the item you want to operate with the

/ buttons and

press the button or the ENTER button to start operating. Then you

can operate according to the following table.

Table 9: OPTION Menu

Item Actions/Description

VOLUME

Adjust Volume:

Loud Quiet

AUTO OFF Adjust AUTO OFF Time:

• Long (MAX. 99 min.)

• Short (Min. 1 min.)

• (DISABLE: 0 min.)

The system automatically enters the standby mode when no signal is received for the set time.

When the DISABLE (0 min.) is selected this function is inactive.

WHISPER Select WHISPER Mode:

NORMAL

WHISPER

The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic

noise level from the unit is reduced and the brightness level on screen is lowered.

LAMP TIME Refer to Lamp Time:

The starting of this item displays the time that the projector lamp has been

used.

Reset Lamp Time [Use this function only when the lamp is replaced!]

: Keep pressing the

RESET button for 3 seconds or more during the display of the lamp time. Then the menu for

reset will appear. When you have replaced the lamp, select the RESET on the menu with the

button.

• Do not reset the lamp time without replacing the lamp. Reset the lamp time always when

replacing the lamp. The message functions will not operate properly if the lamp time is not

reset correctly.

• Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and

"Replacing the Lamp".

FILTER TIME Refer to Filter Time:

The starting of this item displays the time that the air-filter has been used.

Reset Filter Time [Use this function only when the filter is replaced!] :

Pres the RESET

button for 3 seconds or more during the display of the filter time. Then the menu for reseting the

filter time will display. When you have replaced the filter, select the RESET on the menu with the

button.

• Do not reset the filter time without replacing the filter. Reset the filter time always when

replacing the filter. The message functions will not operate properly if the filter time is not reset

correctly.

• Before replacing the air filter, carefully read the descriptions of "Air-Filter" and "Replacing the

Filter" on page 20.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments

ViewSonic PJ551D - XGA DLP Projector User's Guide Page 20

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJ551D - XGA DLP Projector