ViewSonic PJ551D - XGA DLP Projector User's Guide download pdf (Page 10)

7 ViewSonic PJ500/PJ550/PJ501/PJ551

Cabling

Refer to the table below for connecting each terminal of the projector to a device.

NOTE:

• Before connecting, read the instruction manuals of the devices to be connected, and make sure that the projector is

compatible with the device(s).

• Securely tighten the screws on the connectors.

• For some RGB input modes, the optional Mac adapter is necessary.

• Some computers may have multiple display screen modes. You may not be able to use some of the modes with this

projector.

Power Connection

Use the correct power cord supplied with your projector. Connect the AC inlet of the projector to the

power outlet as shown in the graphic below.

Figure 7: Power Cord Connect

Table 2: Cabling

Function Terminal Cable

Analog RGB input

RGB

Accessory RGB cable or optional

RGB cable with D-sub 15-pin shrink

jack and inch thread screws

RS-232C communication

CONTROL

Optional RS-232C cable

Component video input

VIDEO Y

VIDEO C

Accessory component video cable

S-video input

S-VIDEO

Accessory S-video cable with mini

DIN 4-pin jack

Video input/

Audio input

VIDEO

AUDIO (L)

AUDIO (R)

Accessory video/audio cable with

RCA jacks

Audio Input

3.5 mm to mini-jack L/R

Optional

Warnings

• Incorrect connections could result in fire or electrical shock.

• Before connecting, turn off all devices to be connected.

• Use the cables that are packaged with the product. Refer to page 27.

• See “Power Cord Safety Guidelines” on page 28.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

ViewSonic PJ551D - XGA DLP Projector User's Guide Page 10

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJ551D - XGA DLP Projector