ViewSonic PJ551D - XGA DLP Projector User's Guide download pdf (Page 13)

ViewSonic PJ500/PJ550/PJ501/PJ551 10

Basic Operation

Table 3 below refers to buttons on the projector control panel and on the remote control. Items

marked with (*) may be accessed from the projector control panel.

Table 3: Basic Operation

Item Description

INPUT SELECT

(projector control panel)

Select Input Signal

(*) : press the INPUT Button.

RGB

VIDEO

S-VIDEO

COMPONENT (

RGB)

Select RGB Input:

Press the RGB button.

VIDEO/S-VIDEO/COMPONENT

RGB

Select Video Input:

Press the VIDEO button.

RGB

VIDEO/S-VIDEO/COMPONENT

VIDEO

S-VIDEO

COMPONENT (

VIDEO)

• The selected signal name is displayed for approximately 3 seconds when the input signal is

changed.

POSITION

(remote control)

Set/Clear Position Adjustment mode :

Press the POSITION button.

“POSITION” is displayed in the POSITION mode.

Image Position Adjustment:

Press the buttons in the POSITION mode.

• Valid only in the MAGNIFY mode when a video signal is input.

• After approximately 10 seconds of inactivity “POSITION” disappears and the POSITION

mode is cleared automatically.

RESET (*)

(remote control)

Initialize Each item:

Select an item and press the RESET button.

Initialize Position Adjustment:

Press the RESET button in the POSITION mode.

This function is valid only when RGB signal is input.

• Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER.

MAGNIFY

(remote control)

Set MAGNIFY Mode:

Press the MAGNIFY “ON” button.

ve Magnified Area:

Run the POSITION in the MAGNIFY mode.

Adjust Magnification:

Press the MAGNIFY / button in MAGNIFY mode.

MAGNIFY magnifies the image. MAGNIFY (

) reduces the image.

Clear MAGNIFY Mode:

Press the MAGNIFY button.

• The MAGNIFY mode is cleared by selecting AUTO, ASPECT, INPUT SELECT, or VIDEO,

or changing the input signal.

FREEZE

(remote control)

Set/Clear FREEZE Mode:

Press the FREEZE button. When the [ II ] icon is displayed, the

image is frozen in the FREEZE mode.

• The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic

Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal.

• Do not forget to clear frozen static images.

KEYSTONE (*)

(projector control panel

and remote control)

Set/Clear KEYSTONE Mode:

Press the KEYSTONE button.

Adjust Keystone:

Press the / buttons in the KEYSTONE mode.

reduces the width of the bottom of the projected image. reduces the width of the top

of the projected image.

VOLUME

(remote control)

Set/Clear VOLUME Mode:

Press the VOLUME button to display the Volume menu, then

press / buttons on the remote control to increase/decrease the loudness of the

sound.

After the desired volume is selected, press the VOLUME button again to exit the Volume

mode.

MUTE

(remote control)

Set/Clear Mute Mode:

Press the MUTE button. The sound is silenced in this mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

ViewSonic PJ551D - XGA DLP Projector User's Guide Page 13

Comments to this Manuals

Related products and manuals for Data projectors ViewSonic PJ551D - XGA DLP Projector