ViewSonic PJ1065-2 User's Guide download pdf (Page 18)

16 ViewSonic PJ1065

No Signal Menu

The same adjustments and settings are available as with the Image and

Options menus when the MENU button is pressed during display of the

“NO INPUT IS DETECTED ON***”or “SYNC IS OUT OF RANGE

ON***”message while no signal is received.

Table 8: No Signal Menu

Item Description

VOLUME

Volume Adjustment:

Reduce VOLUME Increase VOLUME

• When this function is used, audio input is automatically switched to video. The

audio input can be switched by moving the DISK PAD left and right during the

display of the volume adjustment bar. The volume adjustment bar is displayed by

pressing VOLUME or VOLUME button.

BLANK

Select Blank Screen:

Select the screen with the / button.The selected one

(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.

MyScreen

is a mode that the customer-customized screen is displayed. This is

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL

is a mode that the factory fixed screen is displayed.

• When MyScreen or ORIGINAL is selected, the screen is going blank after

several minutes.

START UP

Select Start Up Screen:

Select the screen in case of no signal input with the /

button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed

when no signal is input

MyScreen

is a mode that the customer-customized screen is displayed. This is

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL

is a mode that the factory fixed screen is displayed.

TURN OFF

displays the blue screen.

• When MyScreen or ORIGINAL is selected, the screen is going blank after

several minutes.

MIRROR

Operation Start/Stop:

Press the button.

Select Mirror Status:

Select the mirror status with the and buttons.

MENU COLOR

Select Menu Background Color:

Select the color with the and buttons.

LANGUAGE

Operation Start/Stop:

Press the button.

Select Menu Display Language:

Select the language with the and buttons.

AUTO OFF

Operation start/stop:

Press the button.

Set AUTO OFF:

Set 1-99 minutes with the and buttons. The system

automatically enters the standby mode when a signal is not received for the set

time.

Clear AUTO OFF:

Select the STOP (0 min.) with the button. When STOP is

selected the system does not enter the standby mode even if no signal is

received.

SYNC ON G

Operation Start/Stop:

Press the button.

SYNC ON G Valid:

Select the TURN ON with the button.

SYNC ON G Invalid:

Select the TURN OFF with the button.

• May not be displayed correctly with some input signals when the SYNC ON G is

valid. In such cases, remove the signal connector so that no signal is received,

set the SYNC ON G to invalid, and reconnect the signal.

WHISPER

Set / Clear WHISPER Mode:

Press the button. When WHISPER is

selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise

level from the unit is reduced, and brightness level on screen is a little lower.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Comments to this Manuals

No comments

ViewSonic PJ1065-2 User's Guide Page 18

Comments to this Manuals

Related products and manuals for Projectors ViewSonic PJ1065-2