ViewSonic PJ1065-2 User's Guide download pdf (Page 15)

ViewSonic PJ1065 13

Input Menu

The following functions are available when INPUT is selected on the

menu. Select an item with the and buttons, and start or stop operation

with the and buttons. The function indicated (**) are effective on

video input mode, the P.IN P. window on RGB input mode.

Table 5: Input Menu

Item Description

AUTO

Automatic Adjustment at RGB Input:

Select the EXECUTE with the button.

Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase

(H.PHASE), and horizontal size (H.SIZE) are automatically adjusted. Use with

the window at maximum size in the application display.

Automatic Adjustment at Video Input:

Select the EXECUTE with the

button. A signal type appropriate for the input signal will be selected

automatically. Valid only when AUTO is set for VIDEO on the menu.

• This operation requires approximately 10 seconds. It may not function correctly

with some input signals. Pressing the AUTO button in this case may correct this

problem.

• This function is the same as for the AUTO function in Basic operation.

RGB

Displays RGB Input Frequency:

Displays the horizontal and vertical sync

signal frequencies for RGB input.

• Valid only at RGB input.

VIDEO (**)

Select Video Signal Type:

Select the signal type with the and buttons.

Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the

input signal. The selection of AUTO enables and executes the function AUTO

(Automatic Adjustment at Video Input), except for the N-PAL input.

• Use this function when the image becomes unstable (eg. the image becomes

irregular, or lacks color) at VIDEO/S-VIDEO input.

• Automatic Adjustment requires approximately 10 seconds. It may not function

correctly with some input signals. Pressing the AUTO button in this case may

correct this problem except for the N-PAL input.

• For the COMPONENT VIDEO input, this function is not effective and the signal

type is distinguished automatically.

VIDEO NR

(**)

Set/Clear Noise Reduction Mode:

Select the TURN ON / TURN OFF with the

button. When the TURN ON is selected, the NR mode is active and the

noise on screen of the video input will be reduced.

• Valid except for the HDTV.

Progressive

(**)

Select Progressive Mode:

Select the mode suitable for the input signal with the

buttons. The TV mode and the FILM mode convert the interlaced video

signal into the progressive signal. The FILM mode is adaptable 2-3 Pull-Down

system to the conversion.

• Use this function to raise resolution, at the interlaced video input except HDTV

signal.

BLACK **)

Set/Clear Black Enhancement Mode:

Select the TURN ON / TURN OFF with

the button. When the TURN ON is selected, the black enhancement

mode is active and the contrast ratio of the screen for the video input will be

raised by making black level darker.

HDTV (**)

Select HDTV mode:

Select the 1035i mode or 1080i mode suitable for the input

signal with the button.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Comments to this Manuals

No comments

ViewSonic PJ1065-2 User's Guide Page 15

Comments to this Manuals

Related products and manuals for Projectors ViewSonic PJ1065-2