ViewSonic V1250s - Tablet PC - Pentium M 1 GHz User's Guide download pdf (Page 38)

ViewSonic Tablet PC V1250 34

Upgrading the System Memory

Many applications will run faster when the system’s memory

capacity is increased. The V1250 provides one expansion socket

located on the back of the system. You can increase memory by

adding a Small Outline Dual In-line Memory Module, commonly

known as a SODIMM. Module capacity can be 256 MB or 512

MB.

Note: Your V1250 has been tested with a wide range of memory

products on the market. However, not all memory modules are

compatible. Go to www.viewsonic.com for a list of compatible

V1250 modules.

Installing a New Memory Module

Upgrading the V1250 memory is a delicate process. Please

observe the following instructions carefully or have a qualified

technician install memory for you. Damages due to mishandling

during this procedure are NOT covered by the manufacturer’s

warranty.

Warning:

Changing memory while your computer is in suspend mode or in

power-saving mode may cause permanent damage to the V1250.

Make sure you turn off the power, unplug the AC cord, and remove

the battery before proceeding with a memory upgrade.

Do not touch a memory module’s metallic contact edge to avoid

possible damage from an electrostatic discharge.

To Install a New Module

Power OFF the V1250. Unplug the AC cord and all cables/devices attached

to the system. Remove the battery pack. For more information, see the

section Removing the Battery Pack.

2 Place your hand on a large metal object momentarily to discharge any static

electricity.

3 Place the V1250 face-down on a soft flat surface. CAUTION: do not scratch

the LCD display screen or the lid cover.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 65 66

No comments

ViewSonic V1250s - Tablet PC - Pentium M 1 GHz User's Guide Page 38