ViewSonic WMK-005 Installation Manual download pdf (Page 13)

WMK-005

Installation Manual Page - 13 -

Low Profile Installation

OPTIONAL

If your installation requires the overall height of the mount to be less that the approximate 9” shown with

the standard mount assembly, you can convert the height to only 2 ½” by simply removing the adjustment

channel as shown. Once the extension channel is removed, attach the upper ceiling plate to the ceiling.

Once attached install the bell housing, assemble to the upper ceiling plate (Figures 6A and 6B).

Figure 6A. Low Profile Installation

Ceiling Plate

Allen Wrench

Remove the M8 x 16mm, flat

washers and star washers

(both sides).

Replace the flat washers and

M8 x 16mm screws (both

sides).

Bell Housing

Remove the M8 x 16mm,

flat washer and star washer

(both sides).

Completely remove

middle extension.

emoving the middle height extension.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

ViewSonic WMK-005 Installation Manual Page 13