ViewSonic WMK-005 Installation Manual download pdf (Page 10)

WMK-005

Page 10 Installation Manual

Bracket Installation

NOTE: The two-piece mounting barrels are designed to allow for the positioning of each leg around

projector air vents located on the base of the projector. Where applicable, each leg mount may

be shortened by removing the locking screw. This will allow for a better bracket fit, overall.

NOTE: For easier installation, the mounting legs should be first mounted to the projector. Each leg

should then be adjusted so that they can mount to the Universal Mount (Figure 3).

1. Locate the mounting points on the bottom of the projector and use the appropriate number of

mounting legs.

2. Select the mounting hardware that the projector requires and loosely install the universal mount on

the projector.

Figure 3. Bracket Installation

Two Piece Leg

One Piece Leg

Inverted

Projector

Leveling

Barrels

M5 Allen

Wrench

M6 x 12mm

Hex Head

Screw

M5 x 12mm

Hex Head

Screws

M4 x 12mm

Hex Head

Screws

Universal Mount

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

ViewSonic WMK-005 Installation Manual Page 10