ViewSonic P90F Service Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
2
1.8
Voltage Breakdown Test
Connent the live and neutral connections together. Switch the monitor on/off switch to on Apply
1500VAC RMS or 2250VDC, 50Hz for one minute between live and neutral shorted together and
earth. Ensure no voltage breakdown occurs.
1.9
Earth Resistance/Continuity Test
Measure the resistance between the signal cable metal shell and the earth pin in the A.C. socket.
At a current of 25 amperes the resistance should be less than 100m.
NOTE:A portable appliance tester (PAT) is a suitable instrument to use for the above safety tests.
1.10
H.V. Over Voltage Portection (Required for X-Radiation Safety)
Adjust R176 slowly anti-clockwise until the over voltage protection circuit is activated, and the high
voltage must be less than 33KV at this moment. After test, R176 should be adjusted back to
normal(=26.2KV)
CAPACITOR:
C850 400V 4700PFM CAPACITOR.CERAMIC 5230105501
C851 400V 4700PFM CAPACITOR.CERAMIC 5230105501
C135 250V 33UFM CAPACITOR.ELECTROLYTIC 5214433012
C139 100V 330UFM CAPACITOR.ELECTROLYTIC 5214019612
RESISTOR
R827 1K RESISTOR.VS 5162161020
SEMICONDUCTORS
I101, I803 UC3842N IC LINEAR 6644063111
I301 (RA) TDA9116 SDIP32 IC.LINEAR A.S.D.C. 6644076308
I301 (RB) TDA9113 SDTP-32 IC.LINEAR A.S.D.C. 6644076305
I310 TDA8172 7P IC.LINEAR 6644076000
IA01 NT68F62U IC.LSI MCU FLASH MTP 6647008204
Q801 2SK2648-01 TR FET MOS 6626003208
Q433 2SC5587AS TR NPN HF 6621040405
Q121 2SK2843 TR FET MOS 6626003203
D807 RD20EB2-T1 TR PNP HF. 6615011831
D827 HZ5C1 DIODE ZENER 6615007834
OTHERS
SR801 OSA-SS-212DM5 RELAY 5054613402
F801 250V/3.15A FUSE 5054431539
T801 TPW-697 POWER TRANSFORMER 5061369700
T101 TFB-280L TRAQNS.FLYBACK COLOR 5062628032
V901 (CA) M46QDG423X04 CCRT/DY 5051286325
ViewSonic Corporation
Confidential Do Not Copy
P90f-1
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 69 70

Comments to this Manuals

No comments