ViewSonic CDP4260-TL User's Guide download pdf (Page 31)

23

SCAN CONVERSION

Choose to enable or disable the IP (Interlace to

Progressive) conversion function.

• {PROGRESSIVE} - Enable the IP conversion

function (recommended). Once enabled, the

interlace input signal will be converted to

progressive format for better display quality.

• {INTERLACE} - Disable the IP function. This

mode is suitable for displaying motion pictures,

but it increases the chance of image retention.

COLOR SYSTEM

Selects the Color System depending on your input

video format.

The options are: {AUTO} / {NTSC} / {PAL} /

{SECAM} / {4.43NTSC} / {PAL-60}.

NOTE: This item is functional for VIDEO input only.

SCAN MODE

Change the display area of the image.

• {OVERSCAN} - Display about 95% of the

original size of the image. The rest of the areas

surrounding the image will be cut off.

• {UNDERSCAN} - Display the image in its

original size.

NOTE: This item is functional for HDMI-Video

timing input only.

SERIAL CONTROL

Select the network control port.

The options are: {RS-232C} / {LAN}.

NOTE: If {LAN} is selected, then {RS-232C}

will not be activated, even if a cable is

attached, and vice versa.

LAN SETTING

Assign {IP ADDRESS}, {SUBNET MASK}, and

{DEFAULT GATEWAY} for the display.

PIP

1

2

3

EXIT MENU

:SEL

DHCP CLIENT

IP ADDRESS

SUBNET MASK

DEFAULT GATEWAY

LAN SETTING

:RETURN :EXIT MENU

OFF

+-:ADJ

• DHCP - Choose to enable or disable the DHCP

function. If enabled, the display will be assigned

IP address, Subnet mask and Default gateway

automatically. If disabled, you will be prompted

to enter the following value manually. Finally,

press [SET] button to store and save the

chosen values.

APM

{ON} - Power & function recover when either

H & V syncs or digital clock are detected.

{OFF} - It must be used power key by remote

control or Keypad. There is no Wake On LAN.

ADVANCED OPTION RESET

Reset all settings in the ADVANCED OPTION

menu to factory preset values.

1. Press [SET] button to enter the submenu.

2. Press [

] or [ ] button to select {YES}, and

then press [SET] button to do the reset.

EXIT MENU

SET

:SEL :RETURN:SET :EXIT MENU

ADVANCED OPTION RESET

NO

YES

FACTORY RESET

Reset all OSD menu settings ({PICTURE},

{SCREEN}, {AUDIO}, {PIP}, {CONFIGURATION1},

{CONFIGURATION2}, {CONFIGURATION3}, and

{ADVANCED OPTION}) to factory preset values.

1. Press [SET] button to enter the submenu.

2. Press [

] or [ ] button to select {YES}, and

then press [SET] button to do the reset.

EXIT MENU

SET

:SEL :RETURN:SET :EXIT MENU

FACTORY RESET

NO

YES

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Comments to this Manuals

No comments