Viewsonic PJ1065 User Manual download pdf (Page 16)

14 ViewSonic PJ1065

Image Menu

The following adjustments and settings are available when IMAGE is

selected on the menu. Select an item with the and buttons, and start

or stop operation with the and buttons.

Table 6: Image Menu

Item Description

BLANK

Select Blank Screen:

Select the screen with the / button. The selected one

(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.

MyScreen

is a mode that the customer-customized screen is displayed. This is

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL

is a mode that the factory fixed screen is displayed.

• When MyScreen or ORIGINAL is selected, the screen is going blank after

several minutes.

START UP

Select Start Up Screen:

Select the screen in case of no signal input with the /

button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed

when no signal is input

MyScreen

is a mode that the customer-customized screen is displayed. This is

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL

is a mode that the factory fixed screen is displayed.

TURN OFF

displays the blue screen.

• When MyScreen or ORIGINAL is selected, the screen is going blank after

several minutes.

MyScreen

Set MyScreen Mode:

Select the EXECUTE with the button to display the

MyScreen menu and set the MyScreen mode for BLANK and START UP

functions.

ESC

clears and closes the menu box.

NORM.

is default of the MyScreen menu.

FREEZE

freezes the image and displays the frame to capture.

Press the button after freeze to go to the MyScreen Capture Position mode.

In the MyScreen Capture Position mode

, the buttons , , and allow to

move the frame to capture.

After adjusting the position, press the KEYSTONE button to go to the MyScreen

Display Size mode.

To cancel freezing and return to the NORM. Mode of the MyScreen menu, press

the RESET button.

In the MyScreen Display Size mode

, select the magnification x1, x2 or FULL with

the button .

After selecting the magnification, press the KEYSTONE button to go to the CAPT.

mode and start capturing.

To return to the MyScreen Capture Position mode, press the RESET button.

CAPT.

executes a capturing the image. It requires about 20 seconds. After

capturing, the captured image will be displayed for about 10 seconds.

MIRROR

Select Mirror Status:

Select mirror status with button.

P. I N P.

POSIT

Select Position of P. in P. Display:

Press the button.

• Valid only at RGB IN 1, RGB IN 2 or DVI input.

P. I N P.

INPUT

Select signal of P. in P. Display:

Press the button.

VIDEO S-VIDEO COMPONENT

GAMMA

Select Gamma Mode:

Select the gamma mode with the button.

NORMAL CINEMA DYNAMIC

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Comments to this Manuals

No comments

Viewsonic PJ1065 User Manual Page 16

Comments to this Manuals

Related products and manuals for Projectors Viewsonic PJ1065