ViewSonic PJD6221 User's Guide download pdf (Page 25)

EN-22

Menu Position

Choose the menu location on the display screen.

Projection

Adjust the picture to match the orientation of the projector: upright or upside-down, in

front of or behind the screen. Invert or reverse the image accordingly.

Signal Type

Specify the source to the COMPUTER IN 1/COMPUTER IN 2 terminal that you wish to

project.

 Auto : Automatically detect the input signal type from COMPUTER IN 1 and

COMPUTER IN 2 terminals.

 RGB : For VGA signal

 YCbCr/YPbPr:For component signal

Lamp Hours

Display the lamp’s elapsed operating time (in hours).

Lamp Hours Reset

Reset the lamp Hour to 0 hours.

Filter Mode

Use this function to activate filter mode after the projector is installed an optional filter

cover.

Filter Hours

Display the filter’s elapsed operating time (in hours).

 When Filter Mode is turned on, the Filter Hours also turns on automatically.

Filter Hours Reset

Reset the filter Hour to 0 hours.

Power Saving

If no operation is performed for a specific period of time, projector will automatically

turn off.

Auto Source

Automatically scan through all the input source.

ECO Mode

Use this function to dim the projector lamp light output which will lower power

consumption and increase lamp life.

 This function will be unavailable when the DCR function is on.

High Altitude

Use this function to allow the fans operates at full speed continuously to achieve

proper high altitude cooling of the projector.

OSD Timeout

Duration of OSD menu display countly starts (at idle state by second).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 58 59

No comments

ViewSonic PJD6221 User's Guide Page 25