ViewSonic VS11664 User's Guide download pdf (Page 31)

26ViewSonic PJ556D

1. Turn off the projector and unplug the AC

power cord.

2. Place a protective sheet (cloth) beneath the

projector. Turn the projector over so you can

access the lamp cover.

3. Loosen the access panel screws and open the

panel.

4. Loosen the screws on the bottom of the lamp

assembly.

5. Grasp the lamp handle and pull the lamp

assembly directly out of the projector.

6. Replace with the new lamp.

7. Tighten the screws on the bottom of lamp

assembly.

8. Tighten the screws on the lamp cover.

 Dispose of the used lamp according to local regulations.

 Ensure that screws are tightened properly. Screws not tightened fully may

result in injury or accidents.

 Since the lamp is made of glass, do not drop the unit and do not scratch the

glass.

 Do not reuse the old lamp. This could cause the lamp to explode.

 Be sure to turn off the projector and unplug the AC power cord before replacing

the lamp.

 Do not use the projector with the lamp cover removed.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

No comments

ViewSonic VS11664 User's Guide Page 31